Products›Ventilation›Piccolo

Piccolo

General

The Piccolo unit is designed to be mounted above the stove in flats and apartments. The unit is equipped with a control that regulates the fan speeds, the rotating heat exchanger and the after heater. Desired fan speed is chosen on the cooker hood or on a separate operating panel. The unit is also equipped with automatic defrosting of the rotating heat exchanger and a possibility to connect a condense drain. The air from the cooker hood is lead past the heat exchanger. Therefore we recommend that a separate extract air vent be installed in the kitchen so heat recovery can be acquired.

Installation

There are several installation alternatives for the Piccolo unit. It can be placed in the kitchen above the stove with a mounted cooker hood and integration board. It can also be installed elsewhere, i.e. in a washroom. Even if the unit is installed outside the kitchen it’s possible to connect it to the cooker hood by a separate duct. It’s also possible to use the cooker hood to control the unit in this installation alternative.

Installation alternatives

Benefits

• Highly efficient heat recovery due to energy efficient rotating heat exchanger
• Four (4) fan speeds selected either from the cooker hood or from a separate operating panel
• Built-in 800 W electrical after heater
• Manufactured in both right and left handed duct connection layouts

Available models